Animating Orientation

2013-06-21  by:广州有限元分析、培训中心-1CAE.COM  来源:仿真在线

Animating the Camera View Orientation
You can impose a motion on the assembly through the animation by changing the view orientation of the camera over time. The camera view orientation defines how a model is viewed during animation.

To create a view orientation animation of an assembly:

Enable view orientation in the animation.

Drag the timebar to a new position, past the start time.

Drag the key point from the  Orientation and Camera Views  line to the time bar, and select  Place Key.

Do one of the following:

Rotate, pan, or zoom the model to present the view of interest.

Select a standard view tool from the View toolbar.

Right-click the key point in the line that extents from  Orientation and Camera Views , select View Orientation, and select a standard or named view.

Repeat steps 2 through 4 to define the camera view orientation key points for this animation.

When the animation is complete, right-click  Orientation and Camera Views and select Disable Playback of View Keys to prevent any further changes in views from being included in the animation.

Click  Play from Start (MotionManager toolbar) to test your results.

To disable view orientation in an animation:

Right-click  Orientation and Camera Views  in the MotionManager design tree and select Disable View Key Creation.

To enable view orientation in an animation:

Right-click  Orientation and Camera Views  in the MotionManager design tree and select Disable View Key Creation.

To capture a new view key point

 Place a key point in the line that threads from Orientation and Camera Views in the MotionManager design tree.

相关标签搜索：Animating Orientation SolidWorks培训课程 SolidWorks设计教程 SolidWorks视频教程 SolidWorks软件下载 SolidWorks在建筑室内设计工业设计的应用 SolidWorks基础知识 SolidWorks代做 Fluent、CFX流体分析 HFSS电磁分析 Ansys培训 Abaqus培训 Autoform培训